45 datasets found
-
Federal
LCOE Content Model for the Heaving Point Absorber Buoy
Department of Energy —
This is the LCOE analysis spreadsheet and content model for the heaving point absorber buoy developed for controls purposes. The cost assessment was done on a wave-... -
Federal
HERO WEC V1 Upgrade - 2023 Laboratory Testing (processed data)
Department of Energy —
The following submission includes processed laboratory data from NREL's Hydraulic and Electric Reverse Osmosis Wave Energy Converter (HERO WEC), in the form of MATLAB... -
Federal
Triton: Survivability Enhancement of a Multi-Mode Point Absorber
Department of Energy —
The overall goal of this project was to design and validate a survival mode for the Triton WEC that allows for a reduction in peak loads, while simultaneously... -
Federal
Triton Point Absorber 1:30 Scale Tank Test Data for Extreme Wave Environments
Department of Energy —
This content model summarizes laboratory testing data for the Oscilla Power Triton WEC conducted at 1:30 scale. The WEC was tested in large operational waves and in... -
Federal
TEAMER: Laboratory Upgrade Point Absorber v2 CAD Model and Bill of Materials
Department of Energy —
The Laboratory Upgrade Point Absorber (LUPA) is an open-source wave energy converter designed and tested by Oregon State University. The computer-aided design (CAD)... -
Federal
Centipod WEC, Advanced Controls, Resultant LCOE
Department of Energy —
Project resultant levelized cost of energy (LCOE) model after implementation of model predictive control (MPC) controller. Contains annual energy production (AEP)... -
Federal
Reference Model 3 Cost Breakdown (RM3: Wave Point Absorber)
Department of Energy —
Contains the Reference Model 3 (RM3) spreadsheets with the cost breakdown structure (CBS) for the levelized cost of energy (LCOE) calculations for a single RM3 device... -
Federal
Reference Model 3 Scaled Geometry (RM3: Wave Point Absorber)
Department of Energy —
Contains the Reference Model 3 (RM3) scaled scale geometry files of the Wave Point Absorber, developed by the Reference Model Project (RMP). These scaled geometry... -
Federal
Centipod WEC, Advanced Controls, WEC Geometry CAD
Department of Energy —
CAD files depicting the wetted geometry of the Centipod WEC used in numerical models during this project. This includes the wetted geometry of the point absorber body... -
Federal
H3 StingRAY Final Design and Technical Report
Department of Energy —
The goal of this Project was to develop a standards-compliant, fabrication-ready design of Columbia Power Technologies' (C-Power) next-generation wave energy... -
Federal
HERO WEC V1 Upgrades - SolidWorks Models (WEC, RO System, and Submersible Pump Housing)
Department of Energy —
The attached zip files include SolidWorks pack-and-go assemblies of NREL's HERO WEC (hydraulic and electric reverse osmosis wave energy converter), the reverse... -
Federal
HERO WEC V1.0 - WEC-Sim Detailed Simulation Runs and Summary Data
Department of Energy —
Data sets from simulation runs include 144 wave cases that were run based on the WEC-Sim model (https://mhkdr.openei.org/submissions/483). The 144 wave cases... -
Federal
Evaluation of a Wave Powered Water Pump Performance by Ocean Field Testing and WEC-Sim Modeling
Department of Energy —
This submission from AMEC (the Atlantic Marine Energy Center) includes data from an ocean field deployment of a wave powered water pump in March 2023. The wave pump... -
Federal
HERO WEC V1.0 - WEC-Sim Model (July 2024)
Department of Energy —
This submission supersedes submission MHKDR-483 This submission file contains the files that are needed to simulate NREL's HERO WEC (hydraulic and... -
Federal
HERO WEC V1.0 - Electrical PTO Deployment Data and Analysis
Department of Energy —
This submission includes the processed and raw field electrical data from NREL's August 2022 HERO WEC (hydraulic and electric reverse osmosis wave energy converter)... -
Federal
Triton-C Point Absorber Preliminary System Design Package
Department of Energy —
Preliminary System Design Package for the Triton-C WEC, including a report and CAD drawings pertaining to the overall preliminary design, system arrangement, surface... -
Federal
Reference Model 3 Full Scale Geometry (RM3: Wave Point Absorber)
Department of Energy —
Contains the Reference Model 3 (RM3) full scale geometry files of the Wave Point Absorber, developed by the Reference Model Project (RMP). These full scale geometry...
45 datasets found