-
Federal
MODFLOW 6 proof-of-concept groundwater model for the Mekong River Basin between Phnom Penh, Cambodia and Cao Lanh, Vietnam
Department of the Interior —
A proof-of-concept MODFLOW 6 groundwater model was developed to represent the bedrock, delta, and alluvially-deposited aquifers underlying the Mekong River Basin... -
Federal
MODFLOW-NWT model of groundwater flow in the Ozark Plateaus aquifer system
Department of the Interior —
Groundwater in the Ozark Plateaus aquifer system is an important source for municipal, industrial, agricultural, and domestic water supply needs across much of... -
Federal
High and average water table estimates for Clover Creek watershed, Pierce County, Washington
Department of the Interior —
The depths to a high and average water table below the land surface were estimated across the Clover Creek watershed in Pierce County, Washington. Groundwater model... -
Federal
MODFLOW-2005 Groundwater Flow Model to Simulate Predevelopment Groundwater Flow in the Eastern Abu Dhabi Emirate, United Arab Emirates
Department of the Interior —
A numerical groundwater flow model using MODFLOW-2005 was developed to examine predevelopment groundwater flow in eastern Abu Dhabi Emirate, United Arab Emirates. The... -
Federal
MODFLOW-2005 files for numerical model simulations of potential changes in water levels and capture of natural discharge from groundwater withdrawals in Snake Valley and adjacent areas, Utah and Nevada
Department of the Interior —
A previously developed numerical groundwater flow model of the eastern Great Basin was used to investigate where potential drawdown and capture of natural discharge... -
Federal
GSFLOW model simulations used to evaluate the impact of irrigated agriculture on surface water - groundwater interaction
Department of the Interior —
Watershed-scale coupled surface water (SW) – groundwater (GW) flow modeling was used to examine changes in streamflow and SW – GW interaction resulting from... -
Federal
MODFLOW-2005 Models for Revisiting "An Exercise in Groundwater Model Calibration and Prediction"
Department of the Interior —
Hypothetical two-dimensional, steady-state groundwater flow models of a previously published 1988 model calibration exercise were developed using the finite-... -
Federal
MODFLOW-USG model used to evaluate water management issues in the Los Angeles Coastal Plain, California
Department of the Interior —
The U.S. Geological Survey (USGS), in cooperation with the Water Replenishment District of Southern California, developed a regional groundwater model of the Los... -
Federal
SEAWAT code used to couple MODFLOW and MT3DMS models, and supplemental data used to simulate groundwater flow and tritium transport from the HANDLEY underground nuclear test, Pahute Mesa, southern Nevada
Department of the Interior —
Three-dimensional numerical models were used to determine the permeable pathways between the HANDLEY underground nuclear test and downgradient boreholes ER-20-12 and... -
Federal
MODFLOW 6 model of two hypothetical stream-aquifer systems to demonstrate the utility of the new Water Mover Package (MVR) available only with MODFLOW 6
Department of the Interior —
Two MODFLOW 6 (version 6.2.1) models of hypothetical stream-aquifer systems are presented for the demonstration and utility of the Water Mover (MVR) Package available... -
Federal
MODFLOW-NWT model to simulate the groundwater flow system at Puget Sound Naval Shipyard, Naval Base Kitsap, Bremerton, Washington
Department of the Interior —
A three-dimensional groundwater flow model was developed in 1997 to evaluate the groundwater flow system at Puget Sound Naval Shipyard, Naval Base Kitsap, Bremerton,... -
Federal
MODFLOW-NWT model to simulate the groundwater flow system of the Kitsap Peninsula, West-Central Washington
Department of the Interior —
A three-dimensional groundwater flow model, constructed in MODFLOW-NWT, was developed to evaluate the groundwater flow system of the Kitsap Peninsula, west-central... -
Federal
MODFLOW-NWT and MT3D-USGS models for appraising parameter sensitivity and other controlling factors in a synthetic watershed accounting for variably-saturated flow processes
Department of the Interior —
A 3-dimensional (3D) synthetic model, using MODFLOW-NWT and MT3D-USGS, explores the new unsaturated zone heat transport capabilities in MT3D-USGS. Model simulations... -
Federal
MODFLOW-NWT groundwater model used for simulating potential future pumping scenarios and forecasting associated groundwater-level changes in the Truxton aquifer on the Hualapai Reservation and adjacent areas, Mohave County, Arizona
Department of the Interior —
A three-dimensional, numerical groundwater flow model of the Hualapai Plateau and Truxton Basin was developed to assist water-resource managers in understanding the... -
Federal
MODFLOW-NWT and MODPATH models, capture zones and uncertainty analysis for the Partridge River Basin, Minnesota
Department of the Interior —
A MODFLOW-NWT model was used to simulate the groundwater/surface-water interactions in the Partridge River Basin, MN using the Streamflow Routing and Unsaturated Zone... -
Federal
MODFLOW-2005 and MODPATH6 models used to simulate groundwater flow and transport and base-flow age in two tributaries to the Upper Chester River, Maryland
Department of the Interior —
A steady state three-dimensional groundwater flow (MODFLOW-2005) and advective transport (MODPATH6) model was developed to examine subsurface travel times to wells... -
Federal
MODFLOW-2000 model files used to simulate wellbore flow and evaluate aquifer properties and heterogeneity in wells at Fort Irwin National Training Center, San Bernardino County, California
Department of the Interior —
MODFLOW-2000 was used within the AnalyzeHOLE program--an integrated wellbore flow analysis tool (https://doi.org/10.3133/tm4F2)--to simulate the 2-D radial flow to... -
Federal
Heuristic MODFLOW models used to evaluate the effects of pumping groundwater from confined aquifers overlain by till confining units
Department of the Interior —
This groundwater-flow model archive contains heuristic model simulations evaluating the sustainability of groundwater withdrawals from public-water-supply wells on... -
Federal
SEAWAT, MODFLOW-2000, and SHARP models used to simulate future water-supply scenarios, Cape May County, New Jersey
Department of the Interior —
Three groundwater flow models, using MODFLOW-2000, SEAWAT, and SHARP model codes, were used to evaluate plans to supply potable and non-potable water to residents and... -
Federal
MODFLOW datasets for simulations of groundwater flow with downscaled global climate model data for the Suwannee River Basin, Florida
Department of the Interior —
A previously-developed groundwater model of the Suwannee River Basin was modified and calibrated to represent transient conditions. A simulation of recent conditions...