212 datasets found
-
2020 LiDAR - Classified LAS
District of Columbia —
These lidar data are processed classified LAS 1.4 files at USGS QL2 covering the District of Columbia. Voids exist in the data due to data redaction conducted under... -
State
NVCOG
State of Connecticut —
Contours are lines of equal elevation. This is a contour feature layer for the state of Connecticut derived from the index contour in the 1' contour data set. All... -
Federal
High-resolution digital elevation dataset for Mount Baker and vicinity, Washington, based on lidar surveys of 2015
Department of the Interior —
Snow and ice-covered Mount Baker in northern Washington, is the highest peak in the North Cascades (3,286 meters or 10,781 feet) and the northernmost volcano in the... -
State
RiverCOG
State of Connecticut —
Contours are lines of equal elevation. This is a contour feature layer for the state of Connecticut derived from the index contour in the 1' contour data set. All... -
State
NHCOG
State of Connecticut —
Contours are lines of equal elevation. This is a contour feature layer for the state of Connecticut derived from the index contour in the 1' contour data set. All... -
Federal
High-resolution digital elevation dataset for Glacier Peak and vicinity, Washington, based on lidar surveys of August-November, 2014 and June, 2015
Department of the Interior —
Glacier Peak is a 3,214 m (10,544 ft.) stratovolcano composed mainly of dacite. The volcano is located in the Glacier Peak Wilderness Area, in the Mt. Baker-... -
Federal
Beach Profile Data Collected from Madeira Beach, Florida (September 18, 2019)
Department of the Interior —
This dataset, prepared by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC), provides beach profile data collected at... -
Federal
Digital elevation model of South Fork Toutle River, Mount St. Helens, based on June–July 1980 airborne photogrammetry
Department of the Interior —
The lateral blast, debris avalanche, and lahars of the May 18th, 1980, eruption of Mount St. Helens, Washington, dramatically altered the surrounding landscape. The... -
Federal
Topographic Lidar Survey of the Alabama, Mississippi, and Southeast Louisiana Barrier Islands, from September 5 to October 11, 2012 -- Bare Earth Digital Elevation Models
Department of the Interior —
A topographic lidar survey was conducted from September 5 to October 11, 2012, for the barrier islands of Alabama, Mississippi and southeast Louisiana, including the... -
State
MetroCOG
State of Connecticut —
Contours are lines of equal elevation. This is a contour feature layer for the state of Connecticut derived from the index contour in the 1' contour data set. All... -
State
WestCOG
State of Connecticut —
Contours are lines of equal elevation. This is a contour feature layer for the state of Connecticut derived from the index contour in the 1' contour data set. All... -
Federal
Beach Profile Data Collected from Madeira Beach, Florida (November 16, 2020)
Department of the Interior —
This dataset, prepared by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC), provides beach profile data collected at... -
Federal
Beach Profile Data Collected from Madeira Beach, Florida (July 6, 2023)
Department of the Interior —
This dataset, prepared by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC), provides beach profile data collected at... -
Federal
Sea Turtle Nesting Decision Points and Cross-Shore Beach Profile Data Collected on September 11, 2019, from Melbourne Beach, Florida
Department of the Interior —
On September 11, 2019, surveys were conducted on ‘high-density’ sea turtle nesting areas located on Melbourne Beach, Florida. This dataset, Melbourne_20190911.zip,... -
Federal
Sea Turtle Nesting Decision Points and Cross-Shore Beach Profile Data Collected on July 16, 2019, from Melbourne Beach, Florida
Department of the Interior —
On July 16, 2019, surveys were conducted on ‘high-density’ sea turtle nesting areas located on Melbourne Beach, Florida. This dataset, Melbourne_20190716.zip, was... -
Federal
Sea Turtle Nesting Decision Points and Cross-Shore Beach Profile Data Collected on August 20, 2019, from Melbourne Beach, Florida
Department of the Interior —
On August 20, 2019, surveys were conducted on ‘high-density’ sea turtle nesting areas located on Melbourne Beach, Florida. This dataset, Melbourne_20190820.zip, was... -
Federal
Repeat Lidar and Orthoimagery of Headwater Streams in the Donner und Blitzen River Basin, Oregon: Lidar Intensity Rasters, June 2022
Department of the Interior —
In June and September, 2022, NV5 Geospatial collected aerial imagery and near-infrared (NIR) light detecting and ranging (lidar) data from crewed aircraft over 62... -
Federal
Topographic Lidar Survey of the Alabama, Mississippi, and Southeast Louisiana Barrier Islands, from September 5 to October 11, 2012 -- Classified Point Data
Department of the Interior —
This Data Series Report contains lidar elevation data collected September 5 to October 11, 2012, for the barrier islands of Alabama, Mississippi and southeast... -
Federal
Beach Topography—Fire Island, New York, Post-Hurricane Sandy, April 2013: Ground Based Lidar (ASCII XYZ Point Data)
Department of the Interior —
The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center in Florida and the U.S. Army Corps of Engineers Field Research Facility in Duck,... -
Federal
Beach Topography—Fire Island, New York, Pre-Hurricane Sandy, January 2012: Ground Based Lidar (ASCII XYZ Point Data)
Department of the Interior —
The U.S. Geological Survey St. Petersburg Coastal and Marine Science Center (USGS-SPCMSC) and the U.S. Army Corps of Engineers Field Research Facility (USACE-FRF) of...
212 datasets found