{"@type": "dcat:Dataset", "DOI": "10.21947/1483825", "accessLevel": "public", "bureauCode": ["019:20"], "contactPoint": {"@type": "vcard:Contact", "fn": "Lee Fingersh", "hasEmail": "mailto:lee.fingersh@nrel.gov"}, "dataQuality": true, "description": "**Overview**\n\nSequence P: Wake Flow Visualization, Upwind (P)\n\nThis test sequence used an upwind, rigid turbine with a 0\u00b0 cone angle. The wind speed ranged\nfrom 5 m/s to 15 m/s. Yaw angles of 0\u00b0 to \u201360\u00b0 were achieved. The blade tip pitch was 3\u00b0. The rotor rotated at 72 RPM. Blade and probe pressure measurements were collected. The teeter\ndampers were replaced with rigid links, and these two channels were flagged as not applicable by\nsetting the measured values in the data file to \u201399999.99 Nm. The teeter link load cell was\npre-tensioned to 40,000 N.\n\nThe aluminum blade tip designed to contain a smoke generator was installed, and counterweights\nwere installed in the non-instrumented blade tip to compensate. The turbine was positioned at the\nappropriate yaw angle, and the smoke generator was ignited remotely. The campaign duration\nwas 3 minutes for all tests except P1000000, which was 2 minutes. The file name convention was\nthe standard format except for P10000A0, which indicated a 3\u00b0 pitch angle. File P1000000 used a\n12\u00b0 pitch angle. After these two campaigns were collected, it was determined that all subsequent\ndata should be collected with a 3\u00b0 pitch angle. Pressure data were not acquired during this\nsequence, so all associated data values were flagged as not applicable by setting the measured\nvalues in the data file to 0.000 Pa. Corresponding pressure data are available from Sequence H for\nthe 3\u00b0 pitch angle test points. Flow visualization data obtained from wall- and ceiling-mounted\nvideo cameras were recorded to videotape. The camera locations and calibration procedures are\ndescribed in Appendix J.\n\n**Data Details**\n\nFile naming information can be found in the attached Word document \"Sequence P Filename Key\", copied from the Phase VI Test Report.", "distribution": [{"@type": "dcat:Distribution", "accessURL": "https://a2e.energy.gov/data/uae6/uae6.z15.00", "description": "Main dataset landing page with options to request/download", "format": "00", "mediaType": "application/octet-stream", "title": "uae6/uae6.z15.00"}], "identifier": "https://data.openei.org/submissions/4211", "issued": "2018-11-29T00:00:00Z", "keyword": ["a2e", "atmosphere to electrons", "wind", "weto", "eere", "uae6", "Unsteady Aerodynamics Experiment Phase VI NREL-NASA Ames Wind Tunnel Experiment", "UAE6", "Wind Tunnel Tests Data", "Sequence P", "Raw Data", "z15", "00"], "landingPage": "https://a2e.energy.gov/data/uae6/uae6.z15.00", "license": "https://creativecommons.org/licenses/by/4.0/", "modified": "2020-03-27T00:00:00Z", "programCode": ["019:010"], "projectNumber": "67025", "projectTitle": "Wind Data Hub", "publisher": {"@type": "org:Organization", "name": "Wind Energy Technologies Office (WETO)"}, "title": "UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence P - Raw Data"}