{"@type": "dcat:Dataset", "DOI": "10.21947/1483818", "accessLevel": "public", "bureauCode": ["019:20"], "contactPoint": {"@type": "vcard:Contact", "fn": "Lee Fingersh", "hasEmail": "mailto:lee.fingersh@nrel.gov"}, "dataQuality": true, "description": "**Overview**\n\nSequence M: Transition Fixed (P)\n\nTest sequence M used an upwind, rigid turbine with a 0\u00b0 cone angle. The wind speed ranged from\n5 m/s to 15 m/s. Yaw angles ranged from 0\u00b0 to 90\u00b0. The blade tip pitch was 3\u00b0. The rotor rotated\nat 72 RPM. Blade pressure measurements were collected. The five-hole probes were removed and\nthe plugs were installed. Plastic tape 0.03-mm-thick was used to smooth the interface between the\nplugs and the blade. The teeter dampers were replaced with rigid links, and these two channels\nwere flagged as not applicable by setting the measured values in the data file to \u201399999.99 Nm.\nThe teeter link load cell was pre-tensioned to 40,000 N. During post-processing, the probe\nchannels were set to read \u201399999.99. Zigzag tape was installed near the leading edge of the\ninstrumented blade on both the upper and lower surfaces as described in Appendix K.\nIn addition to the standard 30-second campaigns, yaw sweeps were done at 7 m/s and 10 m/s.\nThese 90-second campaigns were collected while the yaw drive rotated the turbine 90\u00b0 at a rate of\n1\u00b0/s. The file names for these campaigns use the letter designation, followed by two digits for\nwind speed, followed by YSU, followed by 00.\n\n**Data Details**\n\nFile naming information can be found in the attached Word document \"Sequence M Filename Key\", copied from the Phase VI Test Report.", "distribution": [{"@type": "dcat:Distribution", "accessURL": "https://a2e.energy.gov/data/uae6/uae6.z12.00", "description": "Main dataset landing page with options to request/download", "format": "00", "mediaType": "application/octet-stream", "title": "uae6/uae6.z12.00"}], "identifier": "https://data.openei.org/submissions/4208", "issued": "2018-11-29T00:00:00Z", "keyword": ["a2e", "atmosphere to electrons", "wind", "weto", "eere", "uae6", "Unsteady Aerodynamics Experiment Phase VI NREL-NASA Ames Wind Tunnel Experiment", "UAE6", "Wind Tunnel Tests Data", "Sequence M", "Raw Data", "z12", "00"], "landingPage": "https://a2e.energy.gov/data/uae6/uae6.z12.00", "license": "https://creativecommons.org/licenses/by/4.0/", "modified": "2020-03-27T00:00:00Z", "programCode": ["019:010"], "projectNumber": "67025", "projectTitle": "Wind Data Hub", "publisher": {"@type": "org:Organization", "name": "Wind Energy Technologies Office (WETO)"}, "title": "UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence M - Raw Data"}