8c1dd9ca-b136-4406-ad18-cf816a0bee1c_source eng; USA utf8 dataset Simone Montayne Alaska Division of Geological & Geophysical Surveys Metadata Manager (907)451-5020 (907)451-5050 3354 College Road Fairbanks AK 99709-3707 USA dggspubs@alaska.gov 8 am to 4:30 pm, Monday through Friday, except State holidays pointOfContact 2025-09-24 ISO 19115 Geographic Information - Metadata ISO 19115:2003/Cor.1:2006(E) Lidar-derived elevation data for south fork Eagle River Valley, Southcentral Alaska, collected August 17, 2024 2025-01-01 publication Alaska Division of Geological & Geophysical Surveys Fairbanks Alaska, United States publisher Wikstrom Jones, Katreen originator Wolken, G.J. originator https://doi.org/10.14509/31705 DATA Raw Data File RDF 2025-20 8 p. Lidar-derived elevation data for south fork Eagle River Valley, Southcentral Alaska, collected August 17, 2024, Raw Data File 2025-20, releases classified point cloud, digital surface model (DSM), digital terrain model (DTM), and intensity model of South Fork Eagle River valley, Municipality of Anchorage (MOA), Southcentral Alaska, during leaf-on conditions. The survey provides summer 'snow off' surface elevations to derive snow depth information using a separately collected winter 'snow-on' elevation surface. Ground control data were collected on March 24, 2024, and aerial lidar data were collected on August 17, 2024, and subsequently merged and processed using a suite of geospatial processing software. This data collection is released as a Raw Data File with an open end-user license. All files can be downloaded from the Alaska Division of Geological & Geophysical Surveys website (http://doi.org/10.14509/31705). The data was released to support accurate snow depth analysis and surface elevation modeling in the South Fork Eagle River valley by providing high-resolution lidar datasets collected during leaf-on and snow-off conditions. This work was funded by the Federal Emergency Management Agency for the Municipality of Anchorage Grant # EMS-2023-CA-05010. We thank Clearwater Air for their expertise and contribution to these data products. completed Alaska Division of Geological & Geophysical Surveys Metadata Manager (907)451-5020 (907)451-5050 3354 College Road Fairbanks AK 99709-3707 USA dggspubs@alaska.gov 8 am to 4:30 pm, Monday through Friday, except State holidays Please view our website (https://www.dggs.alaska.gov) for the latest information on available data. Please contact us using the e-mail address provided above when possible. pointOfContact notPlanned Aerial Aerial Geology Avalanche Coastal and River DGGS Digital Elevation Model Digital Surface Model (DSM) Digital Terrain Model Elevation Emergency Preparedness Engineering Engineering Geology Environmental Geologic Geologic Hazards Geological Process Geology Geomorphology Geotechnical LiDAR LiDAR Intensity Image LiDAR LAS File Format Point Cloud Data Raster Image Remote Sensing Slope Slope Instability Snow Avalanche Surface Topography theme Alaska Division of Geological & Geophysical Surveys Anchorage Mining District Eagle Lake Harp Mountain Highland Mountain Little Teton Mountain Mount Gordon Lyon Rendezvous Peak South Fork Eagle River Valley Symphony Lake place Alaska Division of Geological & Geophysical Surveys The State of Alaska makes no expressed or implied warranties (including warranties for merchantability and fitness) with respect to the character, functions, or capabilities of the electronic data or products or their appropriateness for any user's purposes. In no event will the State of Alaska be liable for any incidental, indirect, special, consequential, or other damages suffered by the user or any other person or entity whether from the use of the electronic services or products or any failure thereof or otherwise. In no event will the State of Alaska's liability to the Requestor or anyone else exceed the fee paid for the electronic service or product. otherRestrictions Use Constraints: Any hard copies or published datasets utilizing these datasets shall clearly indicate their source. If the user has modified the data in any way, the user is obligated to describe the types of modifications the user has made. The user specifically agrees not to misrepresent these datasets, nor to imply that changes made by the user were approved by the State of Alaska, Department of Natural Resources, Division of Geological & Geophysical Surveys. The State of Alaska makes no express or implied warranties (including warranties for merchantability and fitness) with respect to the character, functions, or capabilities of the electronic data or products or their appropriateness for any user's purposes. In no event will the State of Alaska be liable for any incidental, indirect, special, consequential, or other damages suffered by the user or any other person or entity whether from the use of the electronic services or products or any failure thereof or otherwise. In no event will the State of Alaska's liability to the Requestor or anyone else exceed the fee paid for the electronic service or product. otherRestrictions Access Constraints: This report, map, and/or dataset is available directly from the State of Alaska, Department of Natural Resources, Division of Geological & Geophysical Surveys (see contact information below). Lidar-derived elevation data for Turnagain Pass, southcentral Alaska, September 2, 2018 2021-01-01 publication Alaska Division of Geological & Geophysical Surveys Fairbanks Alaska, United States publisher Wikstrom Jones, K.M. originator Wolken, G.J. originator Daanen, R.P. originator Herbst, A.M. originator https://doi.org/10.14509/30567 Raw Data File RDF 2020-16 7 p crossReference Lidar-derived elevation data for Penguin Ridge, southcentral Alaska, collected September 22, 2021 2024-01-01 publication Alaska Division of Geological & Geophysical Surveys Fairbanks Alaska, United States publisher Wikstrom Jones, K.M. originator Wolken, G.J. originator https://doi.org/10.14509/31158 Raw Data File RDF 2024-5 11 p crossReference Lidar-derived elevation data for Thane Road, southeast Alaska, collected September 6, 2019 2024-01-01 publication Alaska Division of Geological & Geophysical Surveys Fairbanks Alaska, United States publisher Wikstrom Jones, K.M. originator Wolken, G.J. originator https://doi.org/10.14509/31278 Raw Data File RDF 2024-16 7 p crossReference Lidar-derived surface elevation data for Glen Alps, Southcentral Alaska, collected August 17, 2024 2025-01-01 publication Alaska Division of Geological & Geophysical Surveys Fairbanks Alaska, United States publisher Wikstrom Jones, Katreen originator Wolken, G.J. originator https://doi.org/10.14509/31704 Raw Data File RDF 2025-19 8 p crossReference Lidar-derived elevation data for Portage, southcentral Alaska, collected October 15, 2020 2024-01-01 publication Alaska Division of Geological & Geophysical Surveys Fairbanks Alaska, United States publisher Zechmann, J.M. originator Wikstrom Jones, K.M. originator Wolken, G.J. originator https://doi.org/10.14509/31160 Raw Data File RDF 2024-7 10 p crossReference grid eng; USA geoscientificInformation -149.526656 -149.347565 61.160417 61.288465 2024-03-24 2024-08-17 >boundaries: A boundary, also known as an Area of Interest (AOI) or border, that defines the area covered by the data. >classified_points: Classified point cloud data are provided in LAZ format. Data are classified following ASPRS 2019 guidelines (table 1 and contain return and intensity information. For classified ground points, the average point density is 9.2 pts/m2, and the average spacing is 33.3 cm. >dsm: The DSM represents surface elevations, including vegetation heights, buildings, and power lines. It is a single-band, 32-bit GeoTIFF file with a 1-m resolution and a No Data value set to -3.40282306074e+38 (32-bit, floating-point minimum). >dtm: The DTM represents bare earth or snow surface elevations, excluding vegetation and built structures. It is a single-band, 32-bit GeoTIFF file with a 1-m resolution and a No Data value set to -3.40282306074e+38. >footprints: Footprints for tiled data. >lidar_intensity: The lidar intensity image describes the relative amplitude of reflected signals contributing to the point cloud. Lidar intensity is (1) primarily a function of scanned object reflectance in relation to the signal frequency, (2) dependent on ambient conditions, and (3) not necessarily consistent between separate scans. The intensity image is a single-band, 32-bit GeoTIFF file of 1-m resolution, with a No Data value set to -3.40282306074e+38. true data unknown Alaska Division of Geological & Geophysical Surveys Metadata Manager (907)451-5020 (907)451-5050 3354 College Road Fairbanks AK 99709-3707 USA dggspubs@alaska.gov 8 am to 4:30 pm, Monday through Friday, except State holidays Please view our website (https://www.dggs.alaska.gov) for the latest information on available data. Please contact us using the e-mail address provided above when possible. distributor Contact DGGS for current pricing Free download https://doi.org/10.14509/31705 data boundaries, classified points, dsm, dtm, footprints and lidar intensity information dataset Horizontal Positional Accuracy Report Horizontal accuracy was not measured for this collection; it is considered inherent in the airborne GPS/IMU solution. Vertical Positional Accuracy Report We measured a mean elevation offset of +77 cm between 55 control points and the point cloud. This offset was reduced to 2 cm by applying a constant vertical correction to the lidar point data. Using a Triangulated Irregular Network approach, we used 14 checkpoints to determine the nonvegetated vertical accuracy of the point cloud ground class. The project's non-vegetated vertical accuracy has a root mean squared error (RMSE) of 9.3 cm. The entire MOA dataset was processed as a single unit, and relative accuracy was evaluated based on interswath overlap consistency, yielding an RMSE of 2.2 cm. This is a full-release dataset. There was no over-collect. This is a full-release dataset. There was no over-collect. Data quality is consistent throughout the survey, save for gaps over snow areas or in very thick vegetation between flightlines. This lineage was generated by the FGDC CSDGM to 19139 transformation Ground survey - Ground control points were collected on March 24, 2024. We deployed a Trimble R10-2 GNSS base receiver at the South Fork Valley Trailhead parking lot and surveyed points with a rover Trimble R10-2 GNSS receiver/Mesa controller within the survey area. We collected 69 ground control points and checkpoints on paved surfaces. For a GNSS base station occupation to later correct lidar survey flightlines, we set up a Trimble R10-2 near the South Fork Valley Trailhead along West River Drive, with coordinates of 61 degrees, 14 minutes, 30.65813 seconds North and 149 degrees, 27 minutes, 45.78707 seconds West, at 548.5 m elevation. The base station collected points at a rate of 5 Hz from 9:40 am to 8:48 pm (AKDT) on August 17, 2024. 2024-03-24T00:00:00 Aerial survey - DGGS used a Riegl VUX1-LR22 laser scanner with a global navigation satellite system (GNSS) and Northrop Grumman LN-200C inertial measurement unit (IMU) integrated by Phoenix LiDAR Systems. The sensor can collect a maximum of 1,500,000 points per second at a range of 230 m or a minimum of 50,000 points per second at 1,000 m (ranges assume greater than or equal to 20 percent natural reflectance). The scanner operated with a pulse refresh rate of 400,000 pulses per second over heavily vegetated areas or a pulse refresh rate of 200,000 pulses per second over alpine areas. We used a Cessna 180 Skywagon fixed-wing platform to survey from an elevation of approximately 100-300 m above ground level, at a ground speed of approximately 40 m/s, and with a scan angle set from 80 to 280 degrees. A scan rate of 10 revolutions per second was unintentionally used for the entire survey, resulting in larger-than-expected gaps between scan lines. The total survey area covers approximately 59.9 km2. The survey area was accessed by air from Merrill Field Airport, Anchorage, and was part of a larger survey that covered additional areas of interest within the MOA. This part of the survey started at 11:37 a.m. AKDT and ended at 1:44 p.m. AKDT. The weather during the survey was partly cloudy, with no-to-light wind increasing throughout the day. 2024-08-17T00:00:00 Dataset processing - We processed point data in Spatial Explorer for initial filtering and multiple-time-around (MTA) disambiguation. MTA errors, corrected in this process, result from ambiguous interpretations of received pulse time intervals and occur more frequently with higher pulse refresh rates. IMU and GNSS data were processed in Inertial Explorer, and flightline information was integrated with the point cloud in Spatial Explorer. We calibrated the point data at an incrementally precise scale of sensor movement and behavior, incorporating sensor velocity, roll, pitch, and yaw fluctuations throughout the survey. For the lidar data collection, the average pulse density is 14.9 pulses/m2, and the average pulse spacing is 25.9 cm. We created a macro (an ordered list of point classification commands tailored to this dataset) in Terrasolid software and classified points in accordance with the American Society for Photogrammetry and Remote Sensing (ASPRS) 2019 guidelines. Once classified, we applied a geometric transformation and converted the points from ellipsoidal heights to GEOID12B (Alaska) orthometric heights. Raster products were derived from the point cloud in ArcGIS Pro. A 1-m DSM was interpolated from ground and vegetation classes using a triangulation method with a 1-m resolution point thinning window, selecting maximum values. A 1-m DTM was interpolated from all ground-class returns with a triangulation method with a 5-m resolution point thinning window, selecting average values. We also produced a 1-m intensity image using average binning in ArcGIS Pro, with no normalizations or corrections. 2024-01-01T00:00:00 otherRestrictions Metadata Use Constraints: If the user has modified the data in any way they are obligated to describe the types of modifications they have performed in the supporting metadata file. User specifically agrees not to imply that changes they made were approved by the Alaska Department of Natural Resources or Division of Geological & Geophysical Surveys. unknown This metadata was automatically generated from the FGDC Content Standard for Digital Geospatial Metadata standard (version FGDC-STD-001-1998) using the 2019-08-12T11:11:00 version of the FGDC CSDGM to ISO 19139 transform. Simone Montayne Alaska Division of Geological & Geophysical Surveys Metadata Manager (907)451-5020 (907)451-5050 3354 College Road Fairbanks AK 99709-3707 USA dggspubs@alaska.gov 8 am to 4:30 pm, Monday through Friday, except State holidays pointOfContact