{"@type": "dcat:Dataset", "DOI": "10.21947/1483848", "accessLevel": "public", "bureauCode": ["019:20"], "contactPoint": {"@type": "vcard:Contact", "fn": "Lee Fingersh", "hasEmail": "mailto:lee.fingersh@nrel.gov"}, "dataQuality": true, "description": "**Overview**\n\nSequences S, T, and U: Upwind, No Probes (F); Upwind 2\u00b0 Pitch (F);\nUpwind 4\u00b0 Pitch (F)\n\nThis test sequence used an upwind, rigid turbine with a 0\u00b0 cone angle. The wind speed ranged\nfrom 5 m/s to 25 m/s. Yaw angles of 0\u00b0 to 180\u00b0 were achieved for Sequence S, but the yaw angle\nremained at 0\u00b0 for Sequences T and U. The blade tip pitch was 3\u00b0 for Sequence S, 2\u00b0 for\nSequence T, and 4\u00b0 for Sequence U. These three sequences were interleaved during testing\nbecause the pitch angle change was easily made by the turbine operator. The rotor rotated at 72\nRPM. Blade pressure measurements were collected. The five-hole probes were removed and the\nplugs were installed. Plastic tape 0.03-mm-thick was used to smooth the interface between the\nplugs and the blade. The teeter dampers were replaced with rigid links, and these two channels\nwere flagged as not applicable by setting the measured values in the data file to -99999.99 Nm.\nThe teeter link load cell was pre-tensioned to 40,000 N. During post-processing, the probe\nchannels were set to read -99999.99.\n\nIn addition to the standard 30-second campaigns, yaw sweeps were done at 7 m/s and 10 m/s for\nthe Sequence S configuration. These 6-minute campaigns were collected while the yaw drive\nrotated the turbine 360\u00b0 at a rate of 1\u00b0/s. The file names for these campaigns use the letter\ndesignation, followed by two digits for wind speed, followed by YSU, followed by 00.\n\n**Data Details**\n\nFile naming information can be found in the attached Word document \"Sequence T Filename Key\", copied from the Phase VI Test Report.", "distribution": [{"@type": "dcat:Distribution", "accessURL": "https://a2e.energy.gov/data/uae6/uae6.z19.00", "description": "Main dataset landing page with options to request/download", "format": "00", "mediaType": "application/octet-stream", "title": "uae6/uae6.z19.00"}], "identifier": "https://data.openei.org/submissions/4215", "issued": "2018-11-29T00:00:00Z", "keyword": ["a2e", "atmosphere to electrons", "wind", "weto", "eere", "uae6", "Unsteady Aerodynamics Experiment Phase VI NREL-NASA Ames Wind Tunnel Experiment", "UAE6", "Wind Tunnel Tests Data", "Sequence T", "Raw Data", "z19", "00"], "landingPage": "https://a2e.energy.gov/data/uae6/uae6.z19.00", "license": "https://creativecommons.org/licenses/by/4.0/", "modified": "2020-03-27T00:00:00Z", "programCode": ["019:010"], "projectNumber": "67025", "projectTitle": "Wind Data Hub", "publisher": {"@type": "org:Organization", "name": "Wind Energy Technologies Office (WETO)"}, "title": "UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence T - Raw Data"}