{"@type": "dcat:Dataset", "DOI": "10.15121/1452760", "accessLevel": "public", "bureauCode": ["019:20"], "contactPoint": {"@type": "vcard:Contact", "fn": "Greg Nash", "hasEmail": "mailto:gnash@egi.utah.edu"}, "dataQuality": true, "description": "This spreadsheet consist of data and graphs from deep well 58-32 stress testing from 6900 - 7500 ft depth. Measured stress data were used to correct logging predictions of in situ stress. Stress plots shows pore pressure (measured during the injection testing), the total vertical in situ stress (determined from the density logging) and the total maximum and minimum horizontal stresses. The horizontal stresses were determined from the DSI (Dipole Sonic Imager) and corrected to match the direct measurements.", "distribution": [{"@type": "dcat:Distribution", "accessURL": "https://gdr.openei.org/files/1032/58-32%20stress%20logging%20data.xlsx", "description": "Data and graphs of results from well 58-32 stress testing. Testing was conducted for depths ranging from 6900-7500 ft.", "format": "xlsx", "mediaType": "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet", "title": "58-32 Stress Logging Data.xlsx"}], "identifier": "https://data.openei.org/submissions/7188", "issued": "2018-03-14T06:00:00Z", "keyword": ["geothermal", "energy", "well 58-32", "stress", "58-32 stress", "stress test", "58-32 stress data", "58-32 stress test", "Utah FORGE", "Utah", "Roosevelt Hot Springs", "UT", "Youngs Modulus", "Poisson Ratio", "dynamic", "pressure", "pore pressure", "sh max", "vertical", "horizontal", "stress log", "logging", "log", "data", "FORGE", "EGS", "rock properties", "rock props", "geomechanics", "well data", "in situ stress", "resource", "characterization", "Milford", "stress plot"], "landingPage": "https://gdr.openei.org/submissions/1032", "license": "https://creativecommons.org/licenses/by/4.0/", "modified": "2020-03-12T17:30:56Z", "programCode": ["019:006"], "projectLead": "Lauren Boyd", "projectNumber": "EE0007080", "projectTitle": "Utah FORGE", "publisher": {"@type": "org:Organization", "name": "Energy and Geoscience Institute at the University of Utah"}, "spatial": "{\"type\":\"Polygon\",\"coordinates\":[[[-112.916367,38.483935],[-112.879748,38.483935],[-112.879748,38.5148],[-112.916367,38.5148],[-112.916367,38.483935]]]}", "title": "Utah FORGE: Stress Logging Data"}