{"@type": "dcat:Dataset", "DOI": "10.21947/1483813", "accessLevel": "public", "bureauCode": ["019:20"], "contactPoint": {"@type": "vcard:Contact", "fn": "Lee Fingersh", "hasEmail": "mailto:lee.fingersh@nrel.gov"}, "dataQuality": true, "description": "**Overview**\n\nSequences H, I, and J: Upwind Baseline (F), Upwind Low Pitch (F), Upwind\nHigh Pitch (F)\n\nThis test sequence used an upwind, rigid turbine with a 0\u00b0 cone angle. The wind speed ranged\nfrom 5 m/s to 25 m/s. Yaw angles of \u201330\u00b0 to 180\u00b0 were achieved at low wind speeds, and angles\nof \u00b110\u00b0 were achieved for high wind speeds. The blade tip pitch was 3\u00b0 for sequence H, 0\u00b0 for\nsequence I, and 6\u00b0 for sequence J. These three sequences were interleaved during testing because\nthe pitch angle change was easily made by the turbine operator. The rotor rotated at 72 RPM.\nBlade and probe pressure measurements were collected. The teeter dampers were replaced with\nrigid links, and these two channels were flagged as not applicable by setting the measured values\nin the data file to \u201399999.99 Nm. The teeter link load cell was pre-tensioned to 40,000 N.\n\nIn addition to the standard 30-second campaigns, yaw sweeps were done at 7 m/s and 10 m/s.\nThese 6-minute campaigns were collected while the yaw drive rotated the turbine 360\u00b0 at a rate of\n1\u00b0/s. The file names for these campaigns use the letter designation, followed by two digits for\nwind speed, followed by YS, followed by 000.\n\n**Data Details**\n\nFile naming information can be found in the attached Word document \"Sequence I Filename Key\", copied from the Phase VI Test Report.", "distribution": [{"@type": "dcat:Distribution", "accessURL": "https://a2e.energy.gov/data/uae6/uae6.z08.00", "description": "Main dataset landing page with options to request/download", "format": "00", "mediaType": "application/octet-stream", "title": "uae6/uae6.z08.00"}], "identifier": "https://data.openei.org/submissions/4204", "issued": "2018-11-29T00:00:00Z", "keyword": ["a2e", "atmosphere to electrons", "wind", "weto", "eere", "uae6", "Unsteady Aerodynamics Experiment Phase VI NREL-NASA Ames Wind Tunnel Experiment", "UAE6", "Wind Tunnel Tests Data", "Sequence I", "Raw Data", "z08", "00"], "landingPage": "https://a2e.energy.gov/data/uae6/uae6.z08.00", "license": "https://creativecommons.org/licenses/by/4.0/", "modified": "2020-03-27T00:00:00Z", "programCode": ["019:010"], "projectNumber": "67025", "projectTitle": "Wind Data Hub", "publisher": {"@type": "org:Organization", "name": "Wind Energy Technologies Office (WETO)"}, "title": "UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence I - Raw Data"}