-
2010 Census Traffic Analysis Zone (TAZ) State-based
Traffic analysis zones (TAZs) are basic spatial units of analysis facilitating the ability of transportation planners to forecast changes in commuting patterns, trip volumes, and modes of travel, and to develop plans to meet the changing demands for transportation facilities and capacities. Each TAZ represents an area containing similar kinds of land use and commuter travel.
— Organization: U.S. Census Bureau, Department of Commerce
-
2016_division_500
Divisions are groupings of states within a census geographic region, established by the Census Bureau for the presentation of census data. The current nine divisions (East North Central, East South Central, Middle Atlantic, Mountain, New England, Pacific, South Atlantic, West North Central, and West South Central) are intended to represent relatively homogeneous areas that are subdivisions of the four census geographic regions.
— Organization: U.S. Census Bureau, Department of Commerce
-
2014 2010 Census Urban Area
After each decennial census, the Census Bureau delineates urban areas that represent densely developed territory, encompassing residential, commercial, and other nonresidential urban land uses. In general, this territory consists of areas of high population density and urban land use resulting in a representation of the "urban footprint." There are two types of urban areas: urbanized areas (UAs) that contain 50,000 or more people and urban clusters (UCs) that contain at least 2,500 people, but fewer than 50,000 people (except in the U.S. Virgin Islands and Guam which each contain urban clusters with populations greater than 50,000). Each urban area is identified by a 5-character numeric census code that may contain leading zeroes.
— Organization: U.S. Census Bureau, Department of Commerce
-
Current Point Landmarks Shapefile
The Census Bureau includes landmarks in the MTDB for locating special features and to help enumerators during field operations. Some of the more common landmark types include area landmarks such as airports, cemeteries, parks, mountain peaks/summits, schools, and churches and other religious institutions. The Census Bureau has added landmark features to MTDB on an as-needed basis and made no attempt to ensure that all instances of a particular feature were included. The presence or absence of a landmark such as a hospital or prison does not mean that the living quarters associated with that landmark were geocoded to that census tabulation block or excluded from the census enumeration
— Organization: U.S. Census Bureau, Department of Commerce
-
2014tract_500k
State-County-Census Tract, 1:500,000
— Organization: U.S. Census Bureau, Department of Commerce
-
2014 Primary and Secondary Roads
Primary roads are generally divided, limited-access highways within the interstate highway system or under State management, and are distinguished by the presence of interchanges. These highways are accessible by ramps and may include some toll highways. The MAF/TIGER Feature Classification Code (MTFCC) is S1100 for primary roads. Secondary roads are main arteries, usually in the U.S. Highway, State Highway, and/or County Highway system. These roads have one or more lanes of traffic in each direction, may or may not be divided, and usually have at-grade intersections with many other roads and driveways. They usually have both a local name and a route number. The MAF/TIGER Feature Classification Code (MTFCC) is S1200 for secondary roads.
— Organization: U.S. Census Bureau, Department of Commerce
-
Sample of two data.json entries
There is no description for this harvest source
— Organization: Federal Geographic Data Committee
-
2014cd11320m
State-Congressional District (113th) for United States, 1:20,000,000
— Organization: U.S. Census Bureau, Department of Commerce
-
Current Census Tract State-based
Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program. The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate. The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses. Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people. When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions. The spatial size of census tracts varies widely depending on the density of settlement. Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions. In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline. Census tract boundaries generally follow visible and identifiable features. They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses. State and county boundaries always are census tract boundaries in the standard census geographic hierarchy. In a few rare instances, a census tract may consist of noncontiguous areas. These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous. For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area.
— Organization: U.S. Census Bureau, Department of Commerce
-
2014ANRC
State-Alaska Native Regional Corporation , 1:500,000
— Organization: U.S. Census Bureau, Department of Commerce
-
Census TIGER 2012 Secondary School Districts
There is no description for this harvest source
— Organization: U.S. Census Bureau, Department of Commerce
-
Census TIGER 2012 New England City and Town Area
There is no description for this harvest source
— Organization: U.S. Census Bureau, Department of Commerce
-
Census TIGER 2012 Current Metropolitan Statistical Area/Micropolitan...
There is no description for this harvest source
— Organization: U.S. Census Bureau, Department of Commerce
-
2014 Current New England City and Town Area
In New England (Connecticut, Maine, Massachusetts, New Hampshire, Rhode Island, and Vermont), the Office of Management and Budget (OMB) has defined an alternative county subdivision (generally cities and towns) based definition of Core Based Statistical Areas (CBSAs) known as New England City and Town Areas (NECTAs). NECTAs are defined using the same criteria as Metropolitan Statistical Areas and Micropolitan Statistical Areas and are identified as either metropolitan or micropolitan, based, respectively, on the presence of either an urban area of 50,000 or more population or an urban cluster of at least 10,000 and less than 50,000 population. A NECTA containing a single core urban area with a population of at least 2.5 million may be subdivided to form smaller groupings of cities and towns referred to as NECTA Divisions. The NECTAs for the 2010 Census are those defined by OMB and published in 2013.
— Organization: U.S. Census Bureau, Department of Commerce
-
Census TIGER 2012 Tribal Tract
There is no description for this harvest source
— Organization: U.S. Census Bureau, Department of Commerce
-
2014county_within_ua_500k
2014county_within_ua_500k
— Organization: U.S. Census Bureau, Department of Commerce
-
Census TIGER 2012 Elementary School Districts
There is no description for this harvest source
— Organization: U.S. Census Bureau, Department of Commerce
-
Census TIGER 2012 Topological Faces-Area Landmark Relationship
There is no description for this harvest source
— Organization: U.S. Census Bureau, Department of Commerce
-
Current Block State-based
Census Blocks are statistical areas bounded on all sides by visible features, such as streets, roads, streams, and railroad tracks, and/or by nonvisible boundaries such as city, town, township, and county limits, and short line-of-sight extensions of streets and roads. Census blocks are relatively small in area; for example, a block in a city bounded by streets. However, census blocks in remote areas are often large and irregular and may even be many square miles in area. A common misunderstanding is that data users think census blocks are used geographically to build all other census geographic areas, rather all other census geographic areas are updated and then used as the primary constraints, along with roads and water features, to delineate the tabulation blocks. As a result, all 2010 Census blocks nest within every other 2010 Census geographic area, so that Census Bureau statistical data can be tabulated at the block level and aggregated up to the appropriate geographic areas. Census blocks cover all territory in the United States, Puerto Rico, and the Island Areas (American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, and the U.S. Virgin Islands). Blocks are the smallest geographic areas for which the Census Bureau publishes data from the decennial census. A block may consist of one or more faces.
— Organization: U.S. Census Bureau, Department of Commerce
-
Census TIGER 2012 Urban Area State
There is no description for this harvest source
— Organization: U.S. Census Bureau, Department of Commerce