Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Skip to content

Try the next-generation Data Catalog at catalog-beta.data.gov and help shape it with your feedback.

703 harvests found

Frequency: MANUAL

Filter Results

  • 2017_facesmil

    The Topological Faces / Military Installation Relationship File (FACESMIL.dbf) contains a record for each face / military installation relationship. Face refers to the areal (polygon) topological primitives that make up MTDB.

    — Organization: U.S. Census Bureau, Department of Commerce

  • 2017_facesal

    The Topological Faces / Area Landmark Relationship File (FACESAL.dbf) contains a record for each face / area landmark relationship. Face refers to the areal (polygon) topological primitives that make up MTDB. A face is bounded by one or more edges; its boundary includes only the edges that separate it from other faces, not any interior edges contained within the area of the face.

    — Organization: U.S. Census Bureau, Department of Commerce

  • NESDIS/NGDC/MGG/NOS/L00001-L02000

    There is no description for this harvest source

    — Organization: National Oceanic and Atmospheric Administration, Department of Commerce

  • 2015TigerEstate

    Estates are subdivisions of the three major islands in the United States Virgin Islands (USVI). The estates have legally defined boundaries and are much smaller in area than the Census Subdistricts (county subdivisions), but do not necessarily nest within these districts.

    — Organization: U.S. Census Bureau, Department of Commerce

  • 2014 Current Block Group

    Block Groups (BGs) are clusters of blocks within the same census tract. Each census tract contains at least one BG, and BGs are uniquely numbered within census tracts. BGs have a valid code range of 0 through 9. BGs have the same first digit of their 4-digit census block number from the same decennial census. For example, tabulation blocks numbered 3001, 3002, 3003,.., 3999 within census tract 1210.02 are also within BG 3 within that census tract. BGs coded 0 are intended to only include water area, no land area, and they are generally in territorial seas, coastal water, and Great Lakes water areas. Block groups generally contain between 600 and 3,000 people. A BG usually covers a contiguous area but never crosses county or census tract boundaries. They may, however, cross the boundaries of other geographic entities like county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian / Alaska Native / Native Hawaiian areas. The BG boundaries in this release are those that were delineated as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2010 Census.

    — Organization: U.S. Census Bureau, Department of Commerce

  • Current Tribal Block Group National

    A tribal block group is a cluster of census tabulation blocks within a single tribal census tract delineated by American Indian tribal participants or the Census Bureau for the purpose of presenting demographic data on their reservation and/or off-reservation trust land. The tribal block groups are defined independently of the standard county-based block group delineation. For federally recognized American Indian Tribes with reservations and/or off-reservation trust lands with a population less than 1,200, a single tribal block group is defined. Qualifying reservations and/or off-reservation trust lands with a population greater than 1,200 could define additional tribal block groups within their area without regard to the standard block group configuration. Tribal block groups do not necessarily contain tabulation blocks always beginning with the same number and could contain seemingly duplicate block numbers. Tabulation block numbers are still assigned by using standard block groups, not the tribal block groups. To better identify tribal block groups, the letter code range A through K (except I, which could be confused with a number 1) is used uniquely within each tribal census tract. The boundaries of tribal block groups and tribal census tracts are those delineated through the Tribal Statistical Areas Program (TSAP) for the 2010 Census.

    — Organization: U.S. Census Bureau, Department of Commerce

  • 2014_kml_county_within_cd114_500k

    The records in this file allow users to map the parts of the 114th Congressional Districts that overlap a particular county

    — Organization: U.S. Census Bureau, Department of Commerce

  • 2016_pointlm

    The Census Bureau includes landmarks in the MTDB for locating special features and to help enumerators during field operations. Some of the more common landmark types include area landmarks such as airports, cemeteries, parks, mountain peaks/summits, schools, and churches and other religious institutions. The Census Bureau has added landmark features to MTDB on an as-needed basis and made no attempt to ensure that all instances of a particular feature were included. The presence or absence of a landmark such as a hospital or prison does not mean that the living quarters associated with that landmark were geocoded to that census tabulation block or excluded from the census enumeration.

    — Organization: U.S. Census Bureau, Department of Commerce

  • Current American Indian/Alaska Native/Native Hawaiian Areas National (AIANNH)

    The American Indian/Alaska Native/Native Hawaiian (AIANNH) Areas Shapefile includes the following legal entities: federally recognized American Indian reservations and off-reservation trust land areas, state-recognized American Indian reservations, and Hawaiian home lands (HHLs). The statistical entities included are Alaska Native village statistical areas (ANVSAs), Oklahoma tribal statistical areas (OTSAs), tribal designated statistical areas (TDSAs), and state designated tribal statistical areas (SDTSAs). Joint use areas are also included in this shapefile refer to areas that are administered jointly and/or claimed by two or more American Indian tribes. The Census Bureau designates both legal and statistical joint use areas as unique geographic entities for the purpose of presenting statistical data. Note that tribal subdivisions and Alaska Native Regional Corporations (ANRCs) are additional types of American Indian/Alaska Native areas stored by the Census Bureau, but are displayed in separate shapefiles because of how they fall within the Census Bureau's geographic hierarchy. The State of Hawaii's Office of Hawaiian Home Lands provides the legal boundaries for the HHLs. The boundaries for ANVSAs, OTSAs, and TDSAs were delineated for the 2010 Census through the Tribal Statistical Areas Program (TSAP) by participants from the federally recognized tribal governments. The Bureau of Indian Affairs (BIA) within the U.S. Department of the Interior (DOI) provides the list of federally recognized tribes and only provides legal boundary information when the tribes need supporting records, if a boundary is based on treaty or another document that is historical or open to legal interpretation, or when another tribal, state, or local government challenges the depiction of a reservation or off-reservation trust land. The boundaries for federally recognized American Indian reservations and off-reservation trust lands are as of January 1 of the public shapefile release year, as reported by the federally recognized tribal governments through the Census Bureau's Boundary and Annexation Survey (BAS). The boundaries for state-recognized American Indian reservations and for SDTSAs were delineated by a state governor-appointed liaisons for the 2010 Census through the State American Indian Reservation Program and TSAP respectively.

    — Organization: U.S. Census Bureau, Department of Commerce

  • 2016_cbsa_5

    Metropolitan and Micropolitan Statistical Areas are together termed Core Based Statistical Areas (CBSAs) and are defined by the Office of Management and Budget (OMB) and consist of the county or counties or equivalent entities associated with at least one urban core (urbanized area or urban cluster) of at least 10,000 population, plus adjacent counties having a high degree of social and economic integration with the core as measured through commuting ties with the counties containing the core. Categories of CBSAs are: Metropolitan Statistical Areas, based on urbanized areas of 50,000 or more population; and Micropolitan Statistical Areas, based on urban clusters of at least 10,000 population but less than 50,000 population. The CBSAs boundaries are those defined by OMB based on the 2010 Census and published in 2013.

    — Organization: U.S. Census Bureau, Department of Commerce

  • 2017_division_5kml

    Divisions are groupings of states within a census geographic region, established by the Census Bureau for the presentation of census data. The current nine divisions (East North Central, East South Central, Middle Atlantic, Mountain, New England, Pacific, South Atlantic, West North Central, and West South Central) are intended to represent relatively homogeneous areas that are subdivisions of the four census geographic regions.

    — Organization: U.S. Census Bureau, Department of Commerce

  • 2018_anrc

    Alaska Native Regional Corporations (ANRCs) were created pursuant to the Alaska Native Claims Settlement Act (ANCSA), which is federal legislation (Pub. L. 92-203, 85 Stat. 688 (1971); 43 U.S.C. 1602 et seq. (2000)) enacted in 1971, as a "Regional Corporation" and organized under the laws of the State of Alaska to conduct both the for-profit and non-profit affairs of Alaska Natives within a defined region of Alaska.

    — Organization: U.S. Census Bureau, Department of Commerce

  • Current CONCITY

    There is no description for this harvest source

    — Organization: U.S. Census Bureau, Department of Commerce

  • 2014 Current State and Equivalent

    tates and equivalent entities are the primary governmental divisions of the United States. In addition to the fifty States, the Census Bureau treats the District of Columbia, Puerto Rico, and each of the Island Areas (American Samoa, the Commonwealth of the Northern Mariana Islands, Guam, and the U.S. Virgin Islands) as the statistical equivalents of States for the purpose of data presentation.

    — Organization: U.S. Census Bureau, Department of Commerce

  • 2017_addrfeat

    The Address Ranges Feature Shapefile (ADDRFEAT.dbf) contains the geospatial edge geometry and attributes of all unsuppressed address ranges for a county or county equivalent area. The term "address range" refers to the collection of all possible structure numbers from the first structure number to the last structure number and all numbers of a specified parity in between along an edge side relative to the direction in which the edge is coded.

    — Organization: U.S. Census Bureau, Department of Commerce

  • 2014 Current Place

    The TIGER/Line shapefiles include both incorporated places (legal entities) and census designated places or CDPs (statistical entities). An incorporated place is established to provide governmental functions for a concentration of people as opposed to a minor civil division (MCD), which generally is created to provide services or administer an area without regard, necessarily, to population. Places always nest within a state, but may extend across county and county subdivision boundaries. An incorporated place usually is a city, town, village, or borough, but can have other legal descriptions. CDPs are delineated for the decennial census as the statistical counterparts of incorporated places. CDPs are delineated to provide data for settled concentrations of population that are identifiable by name, but are not legally incorporated under the laws of the state in which they are located. The boundaries for CDPs often are defined in partnership with state, local, and/or tribal officials and usually coincide with visible features or the boundary of an adjacent incorporated place or another legal entity. CDP boundaries often change from one decennial census to the next with changes in the settlement pattern and development; a CDP with the same name as in an earlier census does not necessarily have the same boundary. The only population/housing size requirement for CDPs is that they must contain some housing and population. The boundaries of most incorporated places in this shapefile are as of January 1, 2013, as reported through the Census Bureau's Boundary and Annexation Survey (BAS). Limited updates that occurred after January 1, 2013, such as newly incorporated places, are also included. The boundaries of all CDPs were delineated as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2010 Census.

    — Organization: U.S. Census Bureau, Department of Commerce

  • Current Area Hydrography Shapefile

    The Area Hydrography Shapefile contains the geometry and attributes of both perennial and intermittent area hydrography features, including ponds, lakes, oceans, swamps (up to the U.S. nautical three-mile limit), glaciers, and the area covered by large rivers, streams, and/or canals that are represented as double-line drainage. Single-line drainage water features can be found in the Linear Hydrography Shapefile (LINEARWATER.shp). Linear water features includes single-line drainage water features and artificial path features, where they exist, that run through double-line drainage features such as rivers, streams, and/or canals, and serve as a linear representation of these features.

    — Organization: U.S. Census Bureau, Department of Commerce

  • Current Feature Names Relationship File

    The Feature Names Relationship File (FEATNAMES.dbf) contains a record for each feature name and any attributes associated with it. Each feature name can be linked to the corresponding edges that make up that feature in the All Lines Shapefile (EDGES.shp), where applicable to the corresponding address range or ranges in the Address Ranges Relationship File (ADDR.dbf), or to both files. Although this file includes feature names for all linear features, not just road features, the primary purpose of this relationship file is to identify all street names associated with each address range. An edge can have several feature names; an address range located on an edge can be associated with one or any combination of the available feature names (an address range can be linked to multiple feature names). The address range is identified by the address range identifier (ARID) attribute, which can be used to link to the Address Ranges Relationship File (ADDR.dbf). The linear feature is identified by the linear feature identifier (LINEARID) attribute, which can be used to relate the address range back to the name attributes of the feature in the Feature Names Relationship File or to the feature record in the Primary Roads, Primary and Secondary Roads, or All Roads Shapefiles. The edge to which a feature name applies can be determined by linking the feature name record to the All Lines Shapefile (EDGES.shp) using the permanent edge identifier (TLID) attribute. The address range identifier(s) (ARID) for a specific linear feature can be found by using the linear feature identifier (LINEARID) from the Feature Names Relationship File (FEATNAMES.dbf) through the Address Range / Feature Name Relationship File (ADDRFN.dbf).

    — Organization: U.S. Census Bureau, Department of Commerce

  • 2017_concity

    A consolidated city is a unit of local government for which the functions of an incorporated place and its county or minor civil division (MCD) have merged. This action results in both the primary incorporated place and the county or MCD continuing to exist as legal entities, even though the county or MCD performs few or no governmental functions and has few or no elected officials.

    — Organization: U.S. Census Bureau, Department of Commerce

  • 2017_addr

    The Address Ranges Relationship File (ADDR.dbf) contains the attributes of each address range. Each address range applies to a single edge and has a unique address range identifier (ARID) value. The edge to which an address range applies can be determined by linking the address range to the All Lines Shapefile (EDGES.shp) using the permanent topological edge identifier (TLID) attribute

    — Organization: U.S. Census Bureau, Department of Commerce