-
Federal
Reference Model 1 Scaled Geometry (RM1: Tidal Current Turbine)
Department of Energy —
Contains the Reference Model 1 (RM1) scaled scale geometry files of the Tidal Current Turbine, developed by the Reference Model Project (RMP). These scaled geometry... -
Federal
Reference Model 3 Cost Breakdown (RM3: Wave Point Absorber)
Department of Energy —
Contains the Reference Model 3 (RM3) spreadsheets with the cost breakdown structure (CBS) for the levelized cost of energy (LCOE) calculations for a single RM3 device... -
Federal
Fallon FORGE: Well Data, Geophysical Data, and Geologic Maps
Department of Energy —
The data is associated to the Fallon FORGE project and includes mudlogs for all wells used to characterize the subsurface, as wells as gravity, magnetotelluric,... -
Federal
Reference Model 6 Full Scale Geometry (RM6: Oscillating Water Column)
Department of Energy —
Contains the Reference Model 6 (RM6) full scale geometry files of the Oscillating Water Column, developed by the Reference Model Project (RMP). These full scale... -
Federal
Reference Model 3 Scaled Geometry (RM3: Wave Point Absorber)
Department of Energy —
Contains the Reference Model 3 (RM3) scaled scale geometry files of the Wave Point Absorber, developed by the Reference Model Project (RMP). These scaled geometry... -
Federal
EGS Collab Experiment 1: 4850L Downhole Camera Surveys During Injection
Department of Energy —
This package includes data and footage from two rounds of downhole camera surveys performed at the Sanford Underground Research Facility (SURF) on the 4850 level. The... -
Federal
Reference Model 5 Cost Breakdown (RM5: Oscillating Surge Flap)
Department of Energy —
Contains the Reference Model 5 (RM5) spreadsheets with the cost breakdown structure (CBS) for the levelized cost of energy (LCOE) calculations for a single RM5 device... -
Federal
Reference Model 1 Full Scale Geometry (RM1: Tidal Current Turbine)
Department of Energy —
Contains the Reference Model 1 (RM1) full scale geometry files of the Tidal Current Turbine, developed by the Reference Model Project (RMP). These full scale geometry... -
Federal
TEAMER: Numerical Modeling of WECs to Support OES Task 10
Department of Energy —
This submission contains the files for reproducing the waves only and sphere test article simulations for the experimental setup (three different wave conditions)... -
Federal
Lost Circulation Materials in Geothermal Drilling: Thermal Degradation, Viscosity, Compression, and Flow Loop Tests
Department of Energy —
This dataset provides a set of experimental data on the performance of lost circulation materials (LCMs) used in geothermal drilling operations. It includes results... -
Federal
Reference Model 6 Cost Breakdown (RM6: Oscillating Water Column)
Department of Energy —
Contains the Reference Model 6 (RM6) spreadsheets with the cost breakdown structure (CBS) for the levelized cost of energy (LCOE) calculations for a single RM6 device... -
Federal
Bench Testing Data and Report for an Early Prototype Pitch Resonator WEC
Department of Energy —
This dataset encompasses data and documentation from bench tests conducted on an early prototype of a "pitch resonator" wave energy converter (WEC). The testing aimed... -
Federal
Practices Maintain Straight Hole in Crooked Hole Conditions, While Also Enabling Significant Gains in Drill Rate
Department of Energy —
Bottom hole assembly (BHA) designs were assessed in field trials for their ability to achieve critical low inclination requirements, while simultaneously enabling... -
Federal
Fallon FORGE: Gravity and Magnetics Data
Department of Energy —
This package contains principal facts for new gravity data collected September - November 2017 in support of the Fallon FORGE project. Also included are rock core... -
Federal
CODAS Data from Oliktok Point, Beaufort Sea, Alaska
Department of Energy —
Cryosphere/Ocean Distributed Acoustic Sensing (CODAS) data collected from the Beaufort Sea, Alaska, using ~37.4 km of dark telecommunications fiber located at Oliktok... -
Federal
Reference Model 3 Full Scale Geometry (RM3: Wave Point Absorber)
Department of Energy —
Contains the Reference Model 3 (RM3) full scale geometry files of the Wave Point Absorber, developed by the Reference Model Project (RMP). These full scale geometry...