-
Federal
Silica Precipitation and Lithium Sorption
Department of Energy —
This file contains silica precipitation and lithium sorption data from the project. The silica removal data is corrected from the previous submission. The previous... -
Federal
DCIF Westerly Granite AE Stress Effect Test (Task 3-1)
Department of Energy —
Directional Cooling-Induced Fracturing (DCIF) experiments were conducted on rectangular Westerly granite blocks (width=depth=4.0", height=2.0"). Liquid nitrogen was... -
Federal
Utah FORGE: InSAR Data from 2020
Department of Energy —
Interferometric Synthetic Aperture Radar data from the TerraSAR-X and the TanDEM-X satellite missions operated by the German Space Agency (DLR). Interferometric pairs... -
Federal
Conductance Steamflow Relationship
Department of Energy —
These histograms represent our calibration of conductance of a volcanic geothermal field (with a clay cap) and the observed steam flow rates. Darajat is a vapor... -
Federal
Devices Suitable for Sectional Isolation Along Both Cased and Open-hole Wellbores - Large-scale Test Setup
Department of Energy —
The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by... -
Federal
Deep Direct-Use Feasibility Study Computed Tomography (CT)-scanned data Analysis for the Tuscarora Sandstone at the National Energy Technology Laboratory
Department of Energy —
The computed tomography (CT) facilities at the National Energy Technology Laboratory (NETL) Morgantown, West Virginia site were used to characterize core of the... -
Federal
Utah FORGE: InSAR Data 2019
Department of Energy —
This dataset contains Interferometric Synthetic Aperture Radar (InSAR) data used for ground deformation monitoring during Phase 2C of the Utah FORGE project. The... -
Federal
Finite Element Analysis (FEA) for Water-Foam Fracturing of Granite Rock
Department of Energy —
In addition to the foam data that were obtained from literature and that were collected from the current study, simulation data was also generated from finite element... -
Federal
2D Seismic Profiles, Nevada Play Fairway - Granite Springs Valley
Department of Energy —
This data is associated with the Nevada Play Fairway project and contains 2D seismic profile data in cropped jpegs and tiffs, both interpreted and uninterpreted.... -
Federal
Utah FORGE: Earthquake Catalog
Department of Energy —
This is the set of earthquake catalogs developed for the Utah FORGE project covering December of 2016 through March of 2018. These are discussed in the "Utah FORGE... -
Federal
West Flank Coso FORGE: Geologic Cross-Sections
Department of Energy —
Geologic cross sections from the West Flank FORGE site. Cross Section traces linked in resources. -
Federal
Utah FORGE: Phase 2C Topical Report
Department of Energy —
This is the topical report that wraps up the work and results achieved during Utah FORGE Phase 2C. The zip file includes several folders containing (1) an overview;... -
Federal
Utah FORGE: InSAR Data from 2022
Department of Energy —
Interferometric Synthetic Aperture Radar data from the TerraSAR-X and the TanDEM-X satellite missions operated by the German Space Agency (DLR). Interferometric pairs... -
Federal
Utah FORGE: InSAR Data Best Pairs
Department of Energy —
This submission provides Interferometric Synthetic Aperture Radar (InSAR) data covering the Utah FORGE site via the TerraSAR-X and TanDEM-X satellite missions... -
Federal
Using Fully Coupled Hydro-Geomechanical Numerical Test Bed to Study Reservoir Stimulation with Low Hydraulic Pressure
Department of Energy —
This paper documents our effort to use a fully coupled hydro-geomechanical numerical test bed to study using low hydraulic pressure to stimulate geothermal reservoirs... -
Federal
Stability of Elastomers Subjected to Geothermal Well-Like Conditions
Department of Energy —
The aim of this study is to understand how commercially available elastomers perform under geothermal well-like conditions and make recommendations to the community... -
Federal
Utah FORGE 4-2541: Optimization and Validation of a Plug-and-Perf Stimulation Treatment Design - Workshop Presentation
Department of Energy —
This is a presentation on the Optimization and Validation of a Plug-and-Perf Stimulation Treatment Design at Utah FORGE project by Fervo Energy, presented by Sireesh... -
Federal
Brine Geochemistry from Soda Geyser, Idaho
Department of Energy —
These brine samples are collected from the Soda Geyser (a thermal feature, temperature ~30 C) in Soda Springs, Idaho. These samples also represent the overthrust... -
Federal
Mapping Fracture Network Creation with Microseismicity During EGS Demonstrations
Department of Energy —
This a report for the project "Mapping Fracture Network Creation with Microseismicity During EGS Demonstrations". Effective enhanced geothermal systems (EGS) require...