-
Federal
MODFLOW-NWT model for risk-based decision-support groundwater modeling for the lower San Antonio River Basin, Texas, USA
Department of the Interior —
A MODFLOW-NWT groundwater/surface-water model was developed to evaluate the responses of low-flow conditions and groundwater levels within the lower San Antonio River... -
Federal
MODFLOW-NWT simulations of regional groundwater flow under mining and pre-mining scenarios near the Mesabi Iron Range within the St. Louis River Basin, northeastern Minnesota
Department of the Interior —
The U.S. Geological Survey developed two steady-state finite-difference regional groundwater-flow models using the MODFLOW-NWT computer code. These models simulate... -
Federal
MODFLOW-NWT model used in simulation of groundwater availability in the Salt Fork Red River aquifer, southwestern Oklahoma, 1980-2015
Department of the Interior —
The U.S. Geological Survey, in cooperation with the Oklahoma Water Resources Board, constructed a finite-difference numerical groundwater-flow model of the Salt Fork... -
Federal
MODFLOW-NWT model used to simulate groundwater levels in the Des Moines River alluvial aquifer near Des Moines, Iowa
Department of the Interior —
The U.S. Geological Survey constructed a steady-state numerical groundwater flow model in cooperation with Des Moines Water Works (DMWW) to simulate groundwater flow... -
Federal
GWM-2005, MODFLOW-2005, MODFLOW-NWT, and SEAWAT-2000 groundwater flow models of the Bedrock Aquifers at the Kettle Moraine Springs State Fish Hatchery, Sheboygan County, Wisconsin
Department of the Interior —
Three groundwater flow models (KMS model, Pumping Test model, and Modified LMB model) were developed for the Kettle Moraine Springs State Fish Hatchery using the U.S.... -
Federal
MODFLOW-NWT model used to evaluate effects of complexity on head and flow calibration in the Fox-Wolf-Peshtigo watersheds, Wisconsin: U.S. Geological Survey data release.
Department of the Interior —
This data release contains three groundwater-flow models of northeastern Wisconsin, USA, that were developed with differing levels of complexity to provide a... -
Federal
MODFLOW-NWT groundwater flow model used to evaluate groundwater flow in the Elkhorn and Loup River Basins, Central Nebraska, Phase Three: U.S. Geological Survey data release
Department of the Interior —
The U.S. Geological Survey (USGS) refined the spatial and temporal discretization of a previously modeled area (Phase 1: https://pubs.usgs.gov/sir/2008/5143/ and... -
Federal
MODFLOW-NWT model used to evaluate groundwater withdrawal scenarios for the Rush Springs aquifer upgradient from the Fort Cobb Reservoir, western Oklahoma, 1979-2015, including streamflow, base flow, and precipitation statistics
Department of the Interior —
A previously published MODFLOW-NWT groundwater-flow model for the Rush Springs aquifer in western Oklahoma (using 1 steady state stress period followed by 444 monthly... -
Federal
MODFLOW-NWT and MODPATH models, data from aquifer tests and temperature profilers, and groundwater flux estimates used to assess groundwater/surface-water interactions in Haskell Lake, Wisconsin
Department of the Interior —
A MODFLOW-NWT model was used to simulate the water budget for Haskell Lake and Tower Creek in WI using the Lake, Streamflow Routing, and Unsaturated Zone Flow... -
Federal
MODFLOW-NWT model scenarios used to evaluate potential effects of proposed drainage modifications on groundwater discharge in the vicinity of Long Lake, Indiana Dunes National Lakeshore, near Gary, Indiana
Department of the Interior —
A previously developed three-dimensional groundwater-flow model that used the MODFLOW-NWT code was updated to simulate the effects of various proposed drainage... -
Federal
MODFLOW-NWT datasets for the simulation of the drainage infrastructure and groundwater system response to changes in sea level and precipitation, Broward County, Florida
Department of the Interior —
The U.S. Geological Survey, in cooperation with Broward County Environmental Planning and Resilience Division, has developed a groundwater/surface-water model to... -
Federal
MODFLOW-NWT model used to develop a simple method for simulating groundwater interactions with fens to forecast development effects
Department of the Interior —
This groundwater-flow model archive contains all of the input and output files for an inset MODFLOW-NWT model extracted from the northern (Wisconsin) half of a... -
Federal
MODFLOW-NWT model data sets used to evaluate changes in the hydrodynamics of Anvil Lake, Wisconsin
Department of the Interior —
A MODFLOW-NWT groundwater flow model was developed to simulate groundwater movement in the area around Anvil Lake, and groundwater inputs and outputs from the lake... -
Federal
MODFLOW, MT3D-USGS and VS2DH simulations used to estimate groundwater and nutrient inflow to Upper Klamath Lake, Oregon
Department of the Interior —
This model archive data release includes all models used to characterize the magnitude, spatial distribution and timing of groundwater (GW) flow through lakebed... -
Federal
MODFLOW-NWT model used in simulations of selected climate scenarios of groundwater availability in the North Fork Red River aquifer, southwestern Oklahoma
Department of the Interior —
A previously developed model (https://doi.org/10.3133/sir20175098) was coupled with downscaled climate model data to determine the impact of climate variability on... -
Federal
MODFLOW-NWT model used for the simulation of the Cimarron River Alluvial Aquifer in the Pawnee Nation jurisdictional area in Payne County, OK, 2016-17
Department of the Interior —
A three-dimensional, finite-difference MODFLOW 2005 groundwater model using the Newton formulation solver (MODFLOW-NWT) was created for the Cimarron River alluvial... -
Federal
MODFLOW-NWT model used in simulation of groundwater availability in reaches 3 and 4 of the Washita River aquifer, southern Oklahoma, 1980–2017
Department of the Interior —
The U.S. Geological Survey (USGS), in cooperation with the Oklahoma Water Resources Board (OWRB), constructed a finite-difference numerical groundwater-flow model of... -
Federal
MODFLOW-NWT model used to simulate groundwater storage changes in the Quincy Basin, Washington
Department of the Interior —
A three-dimensional, groundwater flow model (MODFLOW-NWT) was developed to examine groundwater storage changes in the Quincy Basin, Washington. The model was... -
Federal
MODFLOW-NWT model used to evaluate potential effects of alterations to the hydrologic system in the vicinity of Long Lake, Indiana Dunes National Lakeshore, near Gary, Indiana
Department of the Interior —
A three dimensional groundwater flow model (MODFLOW-NWT) was developed to examine the effects of changes to engineering controls and Lake Michigan surface water...