80 datasets found
-
Federal
Boundary of the hydrogeologic framework model by IT Corporation (1996), for the Death Valley regional ground-water flow system study, Nevada and California
Department of the Interior —
This digital data set defines the boundary of the hydrogeologic framework model (HFM) developed by IT Corporation (1996) for the U.S. Department of Energy Underground... -
Federal
Subregions of the Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set defines the subregions of the transient ground-water flow model of the Death Valley regional ground-water flow system (DVRFS). Subregions are... -
Federal
VS2DI model used to evaluate groundwater connectivity of wetlands in the Prairie Pothole Region, North Dakota
Department of the Interior —
A two-dimensional, groundwater flow model (VS2DI) was developed to examine groundwater flow near wetlands in the Prairie Pothole Region of North Dakota. Four model... -
Federal
Deep Direct-Use Feasibility Study Numerical Modeling and Uncertainty Analysis using iTOUGH2 for West Virginia University
Department of Energy —
To reduce the geothermal exploration risk, a feasibility study is performed for a deep direct-use system proposed at the West Virginia University (WVU) Morgantown... -
Federal
Locations, values, and uncertainties of hydraulic-head observations for the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital geospatial data set contains the locations, values, and uncertainties of hydraulic-head observations used in the calibration of the transient model of... -
Federal
Lateral boundary of the steady-state ground-water flow model by D'Agnese and others (2002), Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set defines the lateral boundary of the area simulated by the steady-state ground-water flow model of the Death Valley regional ground-water flow... -
Federal
Boundary of the hydrogeologic framework model by IT Corporation (1996), for the Death Valley regional ground-water flow system study, Nevada and California
Department of the Interior —
This digital data set defines the boundary of the hydrogeologic framework model (HFM) developed by IT Corporation (1996) for the U.S. Department of Energy Underground... -
Federal
Simulated potentiometric surface contours of prepumping conditions in layer 1 of the transient ground-water flow model of the Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
These simulated potentiometric surface contours represent prepumping (or steady-state) conditions for model layer 1 of the Death Valley regional ground-water flow... -
Federal
Lateral boundary of the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set defines the lateral boundary and model domain of the area simulated by the transient ground-water flow model of the Death Valley regional... -
Federal
Initial hydraulic heads for the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set defines the hydraulic-head values in 16 model layers used to initiate the transient simulation of the Death Valley regional ground-water flow... -
Federal
Potential structural barriers to ground-water flow, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital dataset defines the surface traces of regional geologic structures designated as potential ground-water flow barriers in an approximately 45,000 square-... -
Federal
Surface altitudes of hydrogeologic units used in the hydrogeologic framework and transient ground-water flow model of the Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
A digital three-dimensional (3D) hydrogeologic framework model (HFM) represents the geometry and extent of hydrogeologic units (HGUs) and major structures in the... -
Federal
Boundary of the ground-water flow model by D'Agnese and others (1997), for the Death Valley regional ground-water flow system study, Nevada and California
Department of the Interior —
This digital data set defines the boundary of the ground-water flow model by D'Agnese and others (1997). This steady-state, 3-layer ground-water flow model was... -
Federal
Reference wells for the regional ground-water potential map by Bedinger and Harrill (2004), Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital geospatial data set is a compilation of reference points representing wells deeper than 300 meters in Nevada that were used for the regional ground-water... -
Federal
False-color composite of Landsat data for the Death Valley regional ground-water flow system project, Nevada and California
Department of the Interior —
The false-color composite image of the Death Valley regional ground-water flow system (DVRFS), an approximately 100,000 square-kilometer region of southern Nevada and... -
Federal
Topographic reference points in California for the regional ground-water potential map by Bedinger and Harrill (2004), Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set is a compilation of reference points representing surface-water features, ground-water levels, and topographic settings in California that were... -
Federal
Boundary of the southwestern Nevada volcanic field from Laczniak and others (1996), for the Death Valley regional ground-water flow system study, Nevada and California
Department of the Interior —
This digital data set defines the boundary of the southwestern Nevada volcanic field (SWNVF), an area of thick, regionally distributed volcanic rocks within the Death... -
Federal
Potential structural barriers to ground-water flow, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital dataset defines the surface traces of regional geologic structures designated as potential ground-water flow barriers in an approximately 45,000 square-... -
Federal
Simulated potentiometric surface contours of prepumping conditions in layer 16 of the transient ground-water flow model of the Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
These simulated potentiometric surface contours represent prepumping (or steady-state) conditions for model layer 16 of the Death Valley regional ground-water flow... -
Federal
Discharge areas for the transient ground-water flow model, Death Valley regional ground-water flow system, Nevada and California
Department of the Interior —
This digital data set represents discharge areas in the Death Valley regional ground-water flow system (DVRFS) transient model. Natural ground-water discharge occurs...
80 datasets found